EMI < Products < Air Handlers
Hydronic Air Handlers
HWFC Hydronic Air Handler The HWFC Series of hydronic air handlers are designed to be installed in any residential or light commercial warm air application. The HWFC is an integral component of a complete heating system that utilizes an oil or gas-fired hot water boiler as its primary heating source and a dedicated duct system. All HWFC models are designed to accept add-on air conditioning equipment to provide centralized comfort conditioning in all seasons. Available in three sizes, the HWFC offers a full range of heating and cooling capacities-up to 147, 250 BTU/h heating and cooling from 3 to 5 tons (36,000-60,000 BTU/h). SDXW Air Handler DX Cooling with Hot Water Heat The SDXW Series horizontal fan coil series is designed for horizontal mounting into a furred down ceiling. This space saving SDXW series handles up to 1150 CFM of air movement, up to 3 tons of cooling and 14,400 to 51,100 hot water heat capacity. For cooling requirements, these units are designed to accept coils tomatch with most brands of AC condensing units. The SDXW Series are rated for 115 V and are U.L. listed. SEHX Air Handler DX Cooling with Electric Heat The SDXW Series horizontal fan coil series is designed for horizontal mounting into a furred down ceiling. This space saving SDXW series handles up to 1150 CFM of air movement, up to 3 tons of cooling and 14,400 to 51,100 hot water heat capacity. For cooling requirements, these units are designed to accept coils tomatch with most brands of AC condensing units. The SDXW Series are rated for 115 V and are U.L. listed.		Warranty Hot water boilers are backed by the most straightforward, comprehensive warranty in the industry - including a lifetime warranty on the entire heat exhanger, not just the sections. All other components are covered for one to five years from date of installation.